All Categories

Automatic Self Cleaning Filter Housing

Home > Products > Liquid Filtration > Automatic Self Cleaning Filter Housing

MF Series MODULINE Bag Filter Housing
MF Series MODULINE Bag Filter Housing
MF Series MODULINE Bag Filter Housing
MF Series MODULINE Bag Filter Housing
MF Series MODULINE Bag Filter Housing
MF Series MODULINE Bag Filter Housing

MF Series MODULINE Bag Filter Housing


Detailed parameters and characteristics for MODULINE Bag Filter Housing

Modular backwash filter MF series

MF filter is a fully automatic filtration system based on the modular design concept. Which has the following features;

.high reliability and flexible scalability

.automatic operation

.high durability,

.no manual cleaning is required

.It is very easy to open and maintain

.The unique V-SLOT filter element is used for thorough back washing and less back washing liquid is consumed.

MF filter can purify fluid, protect key equipment in the rear. It follows DOCTOP process to achieve high performance, efficiency and quality.

The design and manufacturing procedures of our company “SFFILTECH” meets the international first-class quality standard”

Operating principle of MF MODULINE Bag Filter Housing

The liquid flows in from the inlet header to the inlet of each filter unit. The liquid penetrates the outer surface of the filter element from the outside to the inside and then flows to the outlet of each filter unit.

Afterwards it flows out after converging to the outlet header.

The particulate impurities are intercepted on the outer surface of the filter element, forming a filter cake. When the filter differential pressure gradually rises to the preset value (usually 70-130 KPa) or when the cleaning cycle time is up, the control system starts the back washing action.

Back washing each filter unit one by one, and the whole back washing process is completed. When one filter unit is back washed, other units still filter normally. According to the different sources of backwash liquid, the backwash methods are divided into MFR series filters and the filtered clear liquid backwash type.

MFV series filter, externally connected with clear liquid backwash type.

- Main components of MFR MODULINE Bag Filter Housing

1. Control system

2. Solenoid valve protection box

3. Import

4. Outlet

5. Filtering unit

6. Internal filter element

7. Inlet valve of filter unit

8. Filter unit outlet valve

9. Filter unit backwash valve

10. Backwash outlet

11. Differential pressure switch

12. Secondary differential pressure switch

13. Outlet pressure gauge

14. Support

15. Operating platform (optional)


MFR and MFV filter are mainly applicable to the filtration of water and low viscosity liquid with a precision range of 20-500 microns. They are also good at filtering microfiber and sludge


Hot categories