All Categories


Home > BLOG > Manufacturer Casting High Temperature Resistant Precision Jacking Type Single Bag Filter Housing

Manufacturer Casting High Temperature Resistant Precision Jacking Type Single Bag Filter Housing

May 11,2022

Filters are divided into many kinds, liquid, solid, gas, and more small categories. Here is a top-down filter!


The jacking type single bag filter housing is a kind of pressure filter device, which is mainly composed of filter cylinder, filter cylinder cover, quick opening mechanism, stainless steel filter bag reinforcing screen and other main components. The filtrate flows into the filter bag through the side inlet pipe of the filter shell. The filter bag itself is installed in the reinforcing net basket. The liquid can obtain qualified filtrate through the filter bag with the required fineness grade, and the impurity particles are intercepted by the filter bag. The machine is very convenient to replace the filter bag, and there is basically no material consumption.


The jacking type single bag filter housing has many advantages, such as reasonable structure, good sealing, strong circulation ability, simple operation and so on. In particular, the side leakage probability of the filter bag is small, which can correctly ensure the filtration accuracy, and can quickly change the filter bag, reducing the operation cost. The internal and external surfaces of the filter are mechanically sandblasted and polished, which is average and easy to clean. We know that the filtration method adopted by the bag filter housing is the side in and side out method, or the side in and bottom out method can be adopted. The filtered liquid medium is pressed or pumped into the bag filter barrel through the pressure in the pipeline. The liquid medium to be filtered supports the filtration of the filter bag supported by the filter blue through the electro polishing punching, and the changed solid and liquid respectively reach the result of the filtration of the liquid medium.


High efficiency filter bags are made of fine fibers, which have weak hydrophobicity. The surface of the fiber will not be wetted by water, so like other filter elements with the same material, it should be wetted with other liquids with low surface tension before use. Before installation, you must immerse the filter bag in the pre wetting liquid matching the filter liquid for a few minutes. Make sure to open the top cover of the top-down bag filter. Place the upper cover firmly and take out the filter bag carefully. Put in a new filter bag; please refer to the installation process.


The push in bag filter is a simple filter with good effect and low cost, which is suitable for the public. However, we also know that any filter device needs to be cleaned or replaced with filter belt, so this one is no exception. When replacing the filter bag, we must follow the above requirements to ensure the filtering effect.


For more information, please contact themanufacturer of jacking type single bag filter housingfor consultation


Table of Contents

Hot categories