The role of liquid filter bags in metal processing

Metal working The production activity of processing materials with metal properties composed mainly of metal elements or metal elements. Metal processing methods and technologies include: casting, plastic molding processing. Casting: refers to the metal is heated and melted, and then poured into the model, suitable for processing complex parts.

So how is filtration handled in the metal processing industry?

Hydraulic oil filtration, precious metal (aluminum, silver, platinum) dirt removal paint, paint filtration, metal working hydraulic oil filtration, pretreatment system filtration, precious metal recovery, metal working fluids and drawing lubricants. Parts cleaning devices use sffiltech filter bags to reduce residual dirt on parts.

1, turning and boring, ordinary machine tools are common machine tools for turning workpieces. Turning is the process of cutting metal from a workpiece. While the workpiece is rotating, the tool cuts into the workpiece or turns along the workpiece. Boring is a processing method that enlarges or further works the holes that have been drilled or cast on the metal workpiece. Boring on a lathe is done by rotating one side of the single-edge tool and feeding it towards the workpiece.

2, grinding, grinding is the use of a grinding wheel called a grinding wheel to cut the metal processing method. Grinding is a fine machining of the workpiece, and the workpiece size after processing is accurate and the surface is smooth. When grinding a round workpiece, one side of the workpiece is rotated and the other side is fed to the rotating wheel. When grinding a flat workpiece, the workpiece moves back and forth under the rotating wheel. The grinding process is often used to finish hard parts after heat treatment to achieve precise dimensions.

3, milling, milling is the use of rotating tools to remove metal processing, this tool has a number of cutting edges, called milling cutter.

The size of the oil mist filter used in the processing center should be selected according to the required air volume, the processing volume of the machine tool, the required treatment environment (dust, oil mist, water mist), the treatment concentration and the installation location.