Kieli

SEURAAVAA:

kaikki kategoriat

pölypussi

Etusivu » Tuotteet » Pölysuodatin » pölypussi

pölypussi

  • https://www.sffiltech.com/img/aramid_filter_bag.jpg
  • https://www.sffiltech.com/upfile/2018/01/15/20180115104324_885.jpg
  • https://www.sffiltech.com/upfile/2018/01/15/20180115104337_134.jpg

Aramid-suodatinpussi

Tekniset tiedot:
Ota yhteyttä >>
  • Kuvaus
  • hakemus
  • Kuva
  • tiedustelu

materiaali:
aramidineulan lävistyshuopa on valmistettu aramidilangasta, neulan lävistyksen jälkeen saamme tavallisen 450 g / m500: n, 550 g: n ja XNUMX g: n aramidisuodatinkankaan.
Pölynsuodatuksessa käytetään kahta tyyppistä aramidisuodatinkangasta:
1.aramidikuitu aramid-katkaisulla
2.Aramidikuitu lasikuitukannalla

Aramidisuodatinmateriaalien yleinen käsittely:
Laulama, kalanteroitu, lämmönkestävä tai vettä ja öljyä hylkivä, antistaattinen, PTFE-kalvo / pinnoite
 
Suodatinpussin halkaisija on: halkaisija 100 mm, 125 mm, 130 mm, 150 mm, 180 mm, 250 mm jne.
Mikä tahansa pituus on saatavana. Erikoiskoko on räätälöity.
 
Aramidipussisuodatusmenetelmä Menetelmä: ompelu tai hitsaus
 
edut:
Tulenkestävä
Korkea lämpötila
Käyttölämpötila: 204 astetta
Maksimilämpötila: 240 astetta
Erinomainen emäksenkestävyys
Hyvä haponkestävyys
Hyvä orgaanisten liuottimien kestävyys
Erinomainen kulutuskestävyys
Hyvä hydrolyysistabiilisuus
 
Pölynkeräimen suodatinpussi:
Koska jokaisella suodattimella on omat ominaisuudet ja parametrit,
kun valitsimme suodatinmateriaalin pölynkeräinsuodatinpusseille,
meidän on tiedettävä seuraavat parametrit: lämpötila, kostea,
pölyn halkaisija, kaasun kemialliset ominaisuudet, hioma-aine, suodattimen mekaaniset parametrit.
Yleensä SFF-pölynkeräinsuodatinpusseja käytetään laajalti teollisuusjätekaasusuodatuksessa, hyödyllisen pölyn, korkean lämpötilan kaasusuodattimissa.
Shanghain suodatinpussi-tehdas tarjoaa sinulle hyvän ratkaisun pölyominaisuuksien mukaan, auttaa sinua valitsemaan hyvän suodatinmateriaalin parhaan suodatustehokkuuden saavuttamiseksi


Korkean lämpötilan olosuhteet, pölynkeräys ja kaasunkeräystekniikka asfaltinsekoituslaitokselle, sementtilaitokselle, voimalaitokselle, terästehtaalle, sulatuslaitokselle jne. Teollisuuden pölynkeräys.

 

Metallien sulatus - Pölynpoistolaitteet sulatusteollisuudessa

In metal smelting, polyester filter bag is mainly used for steel slag bag filter, steel sintering machine filter, steel blast furnace gas filter and steel plant filter.

1.Suodatin teräskuonalle

The steel slag bag type dust collector comprises an air inlet, an air duct, an inclined baffle plate of the air duct, a filter bag and an ash hopper, which is characterized in that the dust collector is also provided with a guide plate and an inverted V-shaped plate, the guide plate is arranged at the middle lower part of the air duct, the inverted V-shaped plate is arranged at the right lower part of the air duct, and the lower ends of the guide plate and the inverted V-shaped plate are connected with the ash hopper, The upper end of the deflector is connected with the bag room of the dust collector. A quartz emery layer is coated on one side of the inclined baffle plate of the air duct in direct contact with the flue gas. Compared with the prior art, the utility model has the advantages of scientific and simple structure and long service life.

A group of opposite side walls of the steel slag bag filter box body are respectively provided with an air inlet and an air outlet, the air outlet is connected with the air extraction port of the blower, and a filter bag is longitudinally arranged in the box body; The box body is connected in series in the same row, and the middle part of the connecting wall of the adjacent box body is provided with an air vent; The pore size of the filter bag in each box is different. The pore size from the air inlet side to the air outlet side decreases in turn. The particles in the steel slag dust can be quickly separated step by step, and the separation efficiency is high.

Teräskuonan pussisuodattimen pölynpoistovaikutus on seuraava

The dust removal effect of steel slag bag filter is related to many factors, but mainly depends on the filter material. The filter material of bag filter is cloth or felt made of synthetic fiber, fiber or glass fiber. If necessary, sew the cloth or felt into a cylinder or flat filter bag. According to the nature of flue gas, the filter material suitable for application conditions is selected.

Teräskuonan pussisuodattimen edut

Generally, when the flue gas temperature is lower than 120 ℃, the filter material is required to have acid resistance and durability; In the treatment of high temperature flue gas (< 250℃ ) Graphitized glass fiber cloth is mainly used; In some special cases, carbon fiber filter material is selected. In the case of coal and iron stone, explosion-proof treatment is also needed, so the filter material of silk should be selected for the dust removal bag.

 

2. rauta- ja teräs sintraus kone pölynkerääjä

The dust collector of iron and steel sintering machine is an ideal dust removal equipment to solve the problem of dust containing flue gas at the end of sintering machine. According to the characteristics of large exhaust volume, high gas temperature and high dust concentration at the end of sintering machine in sintering plant, when selecting the dust collector system for sintering machine, it is analyzed according to different conditions of sintering machine, so as to achieve better dust removal effect of bag filter.

Raudan ja teräksen sintrauslaitteen pölynkerääjän suorituskykyominaisuudet:
1. Laukun yläosaa käytetään pussin vaihtamiseen.
2. Täydellinen ohjausjärjestelmä pölynpoistojärjestelmän pitkäaikaisen toiminnan varmistamiseksi.
3. Kompakti tulo- ja poistokanava ja tasauslaite, pieni ilmavirran kestävyys.
4. The bag can be changed without stopping the machine, and the normal operation of the equipment will not be affected by the maintenance.
5. The application of pulse blowing with air stopping in separate chamber can prolong the cleaning cycle and reduce the consumption, which can double the service life of filter bag and pulse valve.
6. The box body is designed with air tightness, good sealing performance, and the inspection door is made of excellent sealing material. The production process uses kerosene to detect leakage, with low air leakage rate.
7. The application of pulse injection cleaning technology has strong cleaning capacity, high dust removal efficiency, low emission concentration, small air leakage coefficient, low energy consumption, small steel consumption, small floor area, stable and reliable operation and good economic benefits. It is suitable for flue gas treatment in electric power, building materials, metallurgy, chemical industry and other industries.

The dust remover of iron and steel sintering machine is widely used in the flue gas treatment of electric power, building materials, metallurgy, chemical industry and other industries, especially for the flue gas with big storm and high temperature. It combines the characteristics of chamber back blowing and pulse cleaning, overcomes the shortcomings of ordinary chamber back blowing intensity and general pulse cleaning dust re adsorption, and the lengthened dust removal filter bag gives full play to the strong cleaning effect of compressed air. It is a large dust removal equipment with high dust removal efficiency, small floor area, stable operation, reliable performance and convenient maintenance.

 

3. teräs masuunikaasun pölynkerääjä

The blast furnace gas dust collector of iron and steel adopts the technology of pulse injection dust cleaning by stopping air in different rooms, which overcomes the shortcomings of conventional pulse dust collector and reverse blowing dust collector in different rooms. It has strong dust cleaning ability, high dust removal efficiency, low emission concentration, small air leakage rate, less energy consumption, less steel consumption, less floor area, stable and reliable operation, and good economic benefits. It is suitable for purification of dust gas and material recovery in metallurgy, building materials, cement, machinery, chemical industry, electric power and light industry.

The raw gas (260 ℃) from the raw gas main pipe enters into the lower box of the bag filter through the branch pipe. After mechanical separation, the gas is filtered upward through the cloth bag, and the fine dust is attached to the outer surface of the filter bag. The clean gas is collected into the upper box through the filter bag, and then enters into the hot blast stove through the clean gas branch pipe and the main pipe. When the filtering time is up, with the increase of dust on the surface of the filter bag, the resistance of the dust collector will rise. When the resistance rises to the value, the electrical control system will send out the ash cleaning signal, the pneumatic butterfly valve and upper ball valve of the outlet branch pipe will automatically close, the pulse valve will open, the nitrogen from the cylinder will be injected from the bag mouth through the injection pipe, and the filter bag will expand rapidly.

The dust on the outer surface of the filter bag is shaken off and falls into the conical ash hopper at the lower part. At the end of the pulse valve injection, the dust collector continues to remain static, so that the fine dust in the cylinder has a static settlement process. At the end of this process, the outlet branch pneumatic butterfly valve and the upper ball valve are opened, the dust collector enters the normal filtering state, and the lower ball valve is opened through the impeller feeder The dust cleaning process of a box, the opening and closing of each valve in the above process, and the dust concentration test of a single box are all controlled by PLC system, so that the repeated work can purify the raw gas.

 

4. pölynkerääjä rauta- ja terästehtaalla

The filter bag made of porous filter cloth is used to separate the dust particles from the flue gas flow. When working, the flue gas flows through the filter bag from the outside to the inside, and the dust particles are blocked outside the filter bag.

The iron and steel industry is a major air polluter. The waste gas management of iron and steel industry implements the principle of comprehensive management. Efforts should be made to reduce energy consumption and raw material consumption, which is one of the fundamental ways to increase the emission of waste gas; the process, adopted process and equipment should be innovated to increase the emission of waste gas from consumption process; energy-saving management methods and equipment should be adopted to strengthen the management and recovery of waste gas; comprehensive use should be vigorously carried out.

At the present stage, a large number of flue gas will be discharged from the sintering machine of large steel plants in China, which will contain nitrogen, sulfur dioxide, dioxin, dust and other substances. Taking the sintering machine of 280 square meters as an example, the content of dust discharged into the atmosphere is 150mg / Nm3. According to this calculation, it will cause great pollution to the environment. At present, China has formulated detailed requirements and standards for energy conservation and emission reduction, and put forward suggestions for environmental protection According to the current standard of our country, the dust concentration discharged into the atmosphere is less than 50mg / Nm3, and the bag filter is an important part to achieve this requirement.

Pölynkerääjän päärakenne rauta- ja terästehtaalla:
1. The dust collector is divided into 24 chambers, arranged in two rows, with the main air inlet and outlet ducts in the middle. There are partitions between the silos to realize off-line ash cleaning.
2. Jokaisen astian ilmanottoaukon ja suodatinpussin väliin asetetaan tuulensuoja ja ilmanottotila otetaan käyttöön laatikon sisällä.
3. Each bin is equipped with manual butterfly valve, and the outlet is equipped with pneumatic air stop valve. It can realize off-line ash cleaning and the maintenance of single bin and the air volume distribution of each bin under the condition of non-stop.
4. 216 filter bags are set in each bin, and the size of filter bag is 120mm × 6000mm. There are 5184 silos with a total filtration area of 11716m2.
5. The octagonal star section is adopted for the filter bag frame. Compared with the circular section, it can enhance the ash cleaning effect, reduce the wear between the filter bag and the frame, help to prolong the service life of the filter bag, and facilitate the extraction and insertion of the filter bag frame.
6. Suodatinpussin materiaali on polyesterineulahuopa.
7. A set of injection device is set in each bin, and the injection pipe and the outlet of pulse valve are inserted to facilitate disassembly.
8. The electromagnetic pulse valve is dmf80 straight through fast pulse valve, and its pressure output port is double twisted wire structure.
9. The top of the upper box body is provided with a water falling slope (20:1) and a water falling trough to prevent water from accumulating on the top cover.
11. Jokainen astia on varustettu tuhkasäiliöllä, seinävibraattorilla ja kaivolla.
12. The lower opening of the ash hopper is provided with a manual gate valve and a star type ash discharge valve, the former is used for repairing the star type unloader.

 

 

 

Sementti - Sopiva suodatinpussin pölynkerääjä

1. sementin sekoitusaseman pölynkerääjä

The dust remover of cement mixing station is a new type of pulse bag type dust remover which introduces new equipment and new technology and improves by digestion. The dust collector of cement mixing station has the advantages of large air volume, high purification efficiency, small floor area, small wear of filter bag, long service life, simple filter bag replacement and convenient maintenance. The pulse reverse flow back blowing is used for ash cleaning. The electrical control adopts sequence controller, which has reliable performance and can be widely used for the flue gas purification of asphalt concrete industry. In recent years, the dust removal equipment of asphalt mixing plant has been widely used in various provinces and cities in China, and replaced by them, which is popular with users.

The dust collector of cement mixing station adopts Nomex dust bag to make the dust concentration discharged into the atmosphere less than 50mg/nm3, which meets the environmental protection requirements. The shell of dust remover in asphalt mixing station is insulated by rock wool, which can prevent the condensation of dust bag.

Pölynkerääjän toimintaperiaate sementin sekoituslaitoksessa:

The dust containing gas enters the bag filter from the air inlet, and then filters through the outer surface of the filter bag. The purified gas flows from the inside of the filter bag to the upper chambers, and is discharged from the air outlet through the Changwen tube. When the value reached, pulse blowing is carried out by the program control regularly when the dust adsorbed on the outer surface of the filter bag is reached. That is, the high-pressure air is sprayed to the Changwen tube, and the purified gas is blown back into the filter bag to form a large pressure difference, and the dust is cleaned down to achieve the purpose of cleaning the dust, and the resistance of the whole equipment and system is kept stable, The dust from the back blowing falls to the bottom of the lower box and is discharged and recycled by the screw conveyor.

Sementin sekoituslaitoksen pölynkerääjän ominaisuudet ovat seuraavat:

1. The dust remover of cement mixing station adopts pulse back blowing ash cleaning method, which is one of the best cleaning effects in China. The box on the equipment is separated into 18 chambers which are not connected with each other, and is connected with a Changwen pipe. The purpose of ash cleaning is achieved by using program controlled pulse. The small venturi tube at the top of the spray pipe and filter bag is cancelled in structure. The structure is simple, and the operation and maintenance are convenient.

2. Compared with other dust collectors in China, the dust removal equipment in asphalt mixing plant has the characteristics of large air volume and small system resistance, and has a wide range of applications( Purification and recovery of mixed gas with dust concentration of less than 60g/m3 at room temperature and high temperature)

3. The flower plate edge of the upper middle box is pressed into a conical hole, which makes it contact with the filter bag with a smooth surface, and has good sealing property, and reduces the wear between the hole edge and the filter bag.

4. The dust collector of cement mixing station is simple and reasonable in structure, and covers a small area, and can be installed indoors and outdoors. According to the production process, the air volume, the user can choose the model or parallel combination, and provide carbon steel or stainless steel dust remover as required.

 

2. pölynkerääjä sementtitehtaalla

According to the pore size of cement, fly ash, stone powder, mineral powder, chemical powder and other powdery substances, the filter element of industrial dust collector is designed. The influence of large diameter and adhesion on the pore size of filter element can meet the filtering requirements of various powdery substances. It can not only meet the requirements of bulk truck air delivery and air delivery after the unpacking of finished products, but also ensure that there is no negative pressure in the bin when the powder materials are used. It has the advantages of small volume, compact structure, filtration area of 24 m2, small volume, vibration cleaning, using German filter material.

Sementtilaitoksen pölynpoistajaa käytetään pääasiassa kaikenlaisten jauhemateriaalien keräämiseen siiloon.

Pölynkerääjän toimintaperiaate sementtitehtaalla:

The special dust collector of cement plant ionizes the flue gas by high voltage electric field, and the charged dust in the air flow is separated from the air flow by the electric field. Negative is made of metal wires with different cross-section shapes, which is called discharge electricity. It is made of metal plates with different geometric shapes, which is called dust collector. The performance of dust catcher in cement plant is affected by three factors: dust property, equipment structure and flue gas velocity.

The dust catcher of cement plant will also cause excessive discharge due to the damage of filter bag. The dust collectors in the cement plant are more than 10 bag rooms. It takes 5 ~ 30 minutes to determine the location of the broken bag from the discovery of excessive discharge. At present, the service life of dust removal filter bag is more than one year, and the broken filter bag only occurs after one year. If it is found out that the damaged filter bag is located in the bag room, as long as the bag room is closed and replaced, other bag rooms can still operate normally. Generally, closing 20% bag chamber will not affect the production of process equipment and the dust removal efficiency of dust removal facilities. Timely detection of filter bag damage is the key to reduce excessive emissions, which can only rely on the timely alarm of online continuous detection equipment. It is generally believed that if the bag filter is broken, it can be found when a small part of the bag filter is damaged, and other filter bags will also play a role. The excessive emission is far less than that of the electrostatic precipitator when CO exceeds the standard.

Pölynkerääjän edut sementtitehtaalla

Kaasun käsittelyalue on suuri.

Se voi toteuttaa automaattisen toiminnan hallinnan.

The allowable operating temperature is high, such as shwb circuit dust collector, the allowable operating temperature is 250 ℃, and other types can reach 350 ~ 400 ℃ or high.

The resistance loss is small, generally below 20 mm water column. Compared with cyclone, the total power consumption is still small even considering the power consumption of power supply unit and rapping mechanism.

 

3. pölynkerääjä sementtiastian päällä

The dust remover on the top of cement bin is a kind of single dust removal equipment with automatic ash cleaning structure. This kind of dust remover is widely used in the fine, non fibrous dry dust in the filter gas or a dust removal equipment for recovering dry powder in the process flow in cement, mineral powder, mining, metallurgy, building materials, machinery, chemical industry, grain processing and other industrial and mining enterprises.

Pölynkerääjän toimintaperiaate sementtisiilon päällä:

The dust filter of the dust collector on the top of the bin is carried out through the filter element. The filter element material is glass fiber. When the dust containing air passes through, the solid phase can be used to separate from the gas phase. The filter element of glass fiber is a porous dust filter material. When the air flow passes through, the particles in the air flow can be absorbed on the filter element or settled down due to vibration and the purified air can be discharged, In order to attach and sink the dust into the filter element, the dust collector shall be vibrated in sequence when the fan of each shift is stopped (every 2-4 hours), and the dust collector shall be vibrated for about 5 times.

The main structure design of dust collector on the top of cement silo is the spatial frame structure set by beam element. Therefore, all kinds of loads to be investigated can be simplified to equivalent joint force acting on the beam element node. Because the nature of beam element determines, each beam can be treated as a unit and some secondary beams can be deleted, The calculation amount of the corresponding stiffness and load will be reduced greatly when added to the main beam. The finite element model given here is shown in figure 10-. But it is pointed out that the displacement mode of finite element beam is actually given according to the formula of straight beam in material mechanics. Under the assumption of material mechanics, the internal force and displacement of two ends of the beam are obtained by finite element analysis. Meanwhile, its deformation form is half wave, which is obviously not enough for the analysis of non-random, which is because if a beam is a unit, The instability critical load of beam half wave can only be given by the finite element analysis of its structure, which may lead to the progress of the critical load of the structure and the structural analysis. Therefore, this problem is noticed when modeling the main structure of ESP. The solution is simple. Only some elements (generally one beam is divided into more than 3 elements) are required for some possible stable main beams. In the analysis of non-random, it is necessary to avoid only allowing the half wave instability of the fixed European tie rod at both ends to rise, thus increasing the reliability of the calculation results.

 

4. kuivausrummun pölynkerääjä

The dryer dust remover is specially designed for Φ one point five × 12m、 Φ one point five × 15m、 Φ two point two × 12m、 Φ two point four × The new product developed by the development of flue gas dust removal of drying machine with 16m and other specifications is adopted. The new technology of vertical kiln fiber bag dust removal won the ministerial science and technology progress award of 1989 is adopted for the dryer dust remover. The computer controls the back blowing, timing, fixed resistance ash cleaning and temperature detection display of the chamber, so as to make the glass fiber bag dust remover operate stably in the drying flue gas dust removal, The discharge concentration at the chimney outlet is lower than the specified discharge standard of 150mg/m3n (it can be guaranteed to be less than 100mg/m3n in practice). The equipment can be used for changing bags in separate rooms without stopping. It is simple and reliable to operate. It is used in silicon iron furnace, industrial electric furnace and low operating cost. It is an ideal equipment for flue gas dust removal of domestic dryers.

The dryer dust collector is a dust collector specially used to deal with the exhaust gas of the dryer. The dryer is based on the front hot air stove drum into the hot air to carry on the rolling drying of the material. Because the hot air stove in front of the dryer adopts the coal-fired method, the exhaust gas produced contains a large amount of SO2 and water vapor, which is easy to condensation and produce strong corrosiveness. Under the condition of high temperature and oxygen enrichment, it is also easy to generate H2SO3 with strong corrosiveness. Therefore, the waste gas treatment of the dryer is a serious problem which is a serious problem for production. The above characteristics of exhaust gas should be paid attention to when dealing with such gases. In view of this working condition, our company has carried out special treatment on the dust collector. The flower plate made of ordinary 325 steel plate is replaced with stainless steel. The filter bag is selected, the treated filter bag is fluorous, and the skeleton is made of silicone (or stainless steel). The dust collector is treated with three layers of epoxy polyester anticorrosive coating. The outer layer is insulated with 10 cm thick light rock wool and color steel plate. After the above improvement, the dust collector can meet the working conditions of the dryer.

Kuivausrummun pölynpoistimen käyttöominaisuudet:

Bag filter is stable, simple to maintain and reliable in operation. It can remove dust with 0.1 micron particles, and the dust removal efficiency can reach 99%. The bag filter is used for the exhaust gas of dryer without considering the problem of exceeding the discharge concentration. The dryer anti condensation glass fiber bag dust remover is an ideal dust removal and purification equipment at present.

The dust collector of dryer is controlled by microcomputer, with back blowing in the chamber, cleaning dust at regular time, and equipped with temperature detection and display, over temperature alarm device. Cw300-fca anti condensation glass fiber filter bag is adopted to prevent the filter bag from condensation and will not burn the filter bag. Diameter 3 × The two-stage dust removal process is changed to lfef7 by 24m slag dryer × 358-hsy / h anti condensation bag dust collector, determined by environmental protection department, has a waste gas volume of 42621 standard cubic meters per hour, dust concentration of 69620 mg per standard cubic meter, and dust concentration of 147mg per standard cubic meter at the outlet, which meets the emission standard.

Kuivausrummun pölynpoistajan käyttö:

Under the normal condition of ash cleaning, the remaining ash layer remains stable, that is, the resistance is basically the same before and after ash cleaning, which overcomes the phenomenon of resistance accumulation with the increase of operation time. This kind of wind stopping and shock vibration beating is the combination of optimization of ash cleaning method, so it has high strength ash cleaning effect. The weight of the remaining ash layer is 10-20 times more than that of the average settlement in one filter period; However, the weight of the remaining ash layer is less than one third of the average deposition of a filter cycle, and it is only twice as much as that of the glass fiber flat bag.

The dryer dust remover is suitable for the purification of dust containing gas and the recovery of dust materials in food, pharmaceutical, feed, metallurgy, building materials, cement, machinery, chemical industry, power and light industry.

Yhteydenottolomake