Sprooch

FOLLOWEN:

all Kategorie

Filterbeutel

Home » Produkter » Staubfilter » Filterbeutel

Filterbeutel

  • https://www.sffiltech.com/img/acrylic_filter_bag.jpg

Acryl Filterbeutel

bestëmmen:

1.

description 

Acryl Nadel Gepickt Filter gefillt 

2.

Biller 

 

3.

MOQ 

 

4.

Sample 

 

5.

Entgéintgehal 

 

6.

Spezifizéierung A Features 

Material 

Acryl / Acryl Scrim

deck 

1.9

Gewiicht (g / sqm) 

500

Dicht (g / cm.)³) 

1.17

Loftpermeabilitéit (m³ / m² / min) 

10 ~ 14

Warp Tensile Stäerkt (N / 5x20cm) 

> 1000

Weft tensile Strenght (N / 5x20cm) 

> 1300

Fiichtegkeet Regain (20 ℃ A 65% r Fiichtegkeet) 

1.00%

Warp Verlängerung (%) 

Weft Verlängerung (%) 

Ënnerstëtzt Verbrennung 

Jo

Kontinuéierlech Drockheizungsoperatioun (℃) 

135

Kontinuéierlech Feuchtigkeitwärmungsoperatioun (℃) 

125

Max Kuerz Dréchnen Wärmesur (kuerzfristeg) (℃) 

150

Biologesch (Schimmel, Bakterien) 

ganz gutt

Alkalis 

gerecht

Mineral Säuren 

ganz gutt

Organesch Saieren 

excellent

Oxidéierend Agenten 

gutt

Organesch Léisungsmëttel 

ganz gutt

7.

Ausgruewung 

Singeing-Kalenner-Hëtzt Astellung

8.

Produktanwendungen 

Chemesch / Stol / Offallverbrennung / Thermoelektrizitéit / Baumaterial

9.

Verwendung 

Loftfilter

10.

Type 

Filter Felt

11.

Spezialiséiert op Liwwerung

1. Nadel gepuchte Filz 2. Gewieft Filtratiounsstoff 3. Filterbeutel 4. Filterkäfeger 5. Filterréier automatesch Produktiounslinn

Kontaktéiert eis >>
  • description
  • Applikatioun
  • picture
  • Ëmfro

Material:
Acryl needled felt dust dust chemesche Numm si polyacrylonitrile, benotzt et als Matière première duerch d'Nadel gefëllte Rechtssystem, an dann duerch speziellen waasserdichte Veraarbechtung Acryl mëttler Temperatur kritt Hydrolyse-Resistenz Nadel Filter Filz. Atmung 14 m3 / m2, min Quantitéit, Direktnoriichten Aarbechtstemperatur: 160 ℃, 140 ℃ normal Aarbecht. Nadelgefillt an Acryl Maschinnewéckung als Basis Stoff stäerkt vertikal a horizontal Kraaft.

Virdeel:
Stëbs Sak mat exzellente chemesche Resistenz a Resistenz géint Hydrolyse



widely used in mine, waste incineration, asphalt, drier and coal mill spray dance, such as power plant flue gas dust collecting, has the following features:

 

Mine - Passende Staubkollektor vu Filterbeutel

The acrylic filter bag is mainly used in the dust remover of the stone factory, the bag dust remover of the stone factory, the dust remover of the vibrating screen of the mine, the dust remover of the crushing system of the mine and the dust remover of the mine.

1. Staubfanger vu Steefabréck


The dust remover of shizichang has a new type of dust remover with the first selection level, which combines the advantages of the dust remover with the chamber back blowing and pulse blowing, fully overcomes the disadvantages of the poor intensity of the chamber back blowing and the simultaneous operation of the pulse blowing and filtering, and expands the application scope of the sub bag dust remover. Due to the particularity of the structure of the dust collector in the quarry, the dust removal efficiency is greatly improved and the service life of the filter bag of the equipment is prolonged. It is a kind of bag dust collector with excellent performance. Widely used in building materials, cement, metallurgy, mining plants and refractory industry.

The dust remover of the stone factory has the advantages of simple structure, low investment cost, simple and reliable operation, and low technical requirements for management and maintenance. The dust remover of stone factory has the characteristics of small resistance, high dust removal efficiency, large air volume, stable performance, small floor area, simple structure, practical and cheap. After the dust containing gas enters from the upper air inlet of the ash hopper, under the action of the wind deflector, the air flow moves in the direction and the flow rate decreases. Part of the large particle dust is separated and falls into the ash hopper due to the action of inertia force.

The dust remover of the stone factory has the advantages of simple structure, low investment cost, simple and reliable operation, and low technical requirements for management and maintenance.

Due to the particularity of the structure of the dust collector in the quarry, the dust removal efficiency is greatly improved and the service life of the filter bag of the equipment is prolonged. It is a kind of bag dust collector with excellent performance. Widely used in building materials, cement, metallurgy, mining plants and refractory industry.

 

2. Poschtyp Staubsauger am Steebroch

Bag filter in stone plant is a kind of round shell type dust collector with large air volume, good ash cleaning effect, high dust removal efficiency, reliable operation, convenient maintenance and small floor area.
1. The dust collector in quarry consists of upper box, middle box, ash hopper, support, filter bag assembly, anti blowing and cleaning mechanism, ash discharge valve, etc.
2. Dust collection and filtration system: mainly composed of filter bag, bag cage, flower board assembly, ash hopper and tangential air inlet system.
3. Aschereinigung an Aschentléisungssystem: Héichdrock Fan, Rotary Reverse Bléiser Päif, Retardatiounsmotor.
4. Elektronesch Kontrollsystem: automatescht Kontrollsystem.

The bag filter in stone plant is a round shell, which can shorten the length of the dust collector and facilitate the arrangement. It is equipped with a ash hopper.
Fir de Kierper designt mir d'Kraaft mat enger ongënschteger Ladekombinatioun; Benotzt eng Q235A Plack.
The filter bag specification is φ 260 series. The upper end of the filter bag adopts rubber pad pressing plate, which has good sealing performance and convenient and fast bag changing. Each filter bag is equipped with a carbon steel bag cage.
De Controller hëlt zwou Forme vum automateschen an manuellen Austausch un.
Fir den Täschfilter an d'Operatioun ze garantéieren, ass all Staubkollektor och mat engem Filtertas Leckage Detection Loch ausgestatt.
The dust containing gas enters the upper space of the filter chamber in a tangential direction. Under the centrifugal force of large particles and condensed dust particles, small particles of ash hopper are scattered in the space between the bags of the filter room along the wall of the cylinder, which is blocked by the bag. The purified air is collected in the cleaning room through the bag guide on the flower board through the bag guide port on the bag wall, and is inhaled by the fan and discharged into the atmosphere.


Charakteristike vum Sakfilter a Steeplanz:
1. The flow pattern design of shell cyclone can play a local role in cyclone and reduce the load of filter bag. The shape of the cylinder vault is uniform.
2. The high pressure fan with equipment is used to blow back and clean the ash, which is not limited by the air source conditions in the use situation. The vulnerable parts are few, the maintenance is simple and reliable, and the disadvantages of pulse ash cleaning of compressed air are overcome. The long filter bag can be used for the long air blowing with large distance of anti blowing, which makes full use of space and occupies a small area.
3. The trapezoidal flat bag is used in bag filter of stone factory, which has a large amplitude, and it can shake off dust accumulation only once, which is conducive to improving the bag life.
4. The bag filter in the stone plant automatically controls the rotary back blowing ash cleaning, and automatically adjusts the ash cleaning cycle according to the inlet concentration. Compared with the timing control method, it is reasonable and reliable.

 

3. Staubkollektor vu menge vibrierende Bildschierm

Mine vibrating screen dust remover, also known as gravel filter, is a kind of dust purification equipment mainly used in vibrating screen operation, which deals with the pollution caused by vibrating screen during vibration. At present, vibrating screen dust remover has been widely used in mining, building materials, grain, chemical industry, casting, ceramics and other industries, and is a relatively bag dust collector or material collection equipment.



Funktionsprinzip vu menge vibréierende Bildschirmstaubkollektor:
A large amount of dust is generated during the work of vibrating screen. When the vibrating screen dust remover starts to work, the centrifugal fan of the dust remover forms a negative pressure area at the dust overflow place, and the dust containing gas is inhaled into the dust collector. There are several filter bags in the dust collector. When the dust containing gas passes through the filter bag, the dust is blocked and separated, and the purified gas is discharged through the fan. When the dust on the surface of the filter bag increases and the cutter resistance value reaches the predetermined value, the pressure sensor sends the indicator signal to the electric control box. The pulse blowing system controlled by PLC automatically sprays the filter bag automatically, and the dust attached to the filter bag is shaken off, and the sealed ash discharge pipe directly reaches the belt. That is, the filter bag is always kept good filtration performance, and no secondary dust is generated. According to the work of vibrating screen and the actual situation on site, the design and installation of dust removal device are carried out, and the problems such as overhaul and screen changing of vibrating screen are fully considered.


Haaptfeatures vu méngem vibrierende Schirmstaubkollektor:
1. The investment in one time is small, and compared with other dust collectors, it can be operated for 2 months and the investment cost will be recovered.
2. Et ass passend fir Staubentfernung vu vibrierende Bildschirmsystem vu Kuel, Sinter an Äerz.
3. De Staubentferner gëtt automatesch vun PLC kontrolléiert, an et ass stabil an zouverléisseg.
4. The dust recovered by the dust collector is directly returned to the bin or belt without secondary pollution, saving human and material resources and recycling raw materials.
5. De Stroumverbrauch ass kleng, an d'Operatiouns- a Gestiounskäschte sinn niddereg.
6. According to the nature and temperature of the material, different materials of filter material are selected to ensure the dust removal effect and service life.
7. De Staubkollektor huet keng Landbesetzung.
8. The purification efficiency is high, which meets the requirements of environmental protection index, and solves the problem of dust pollution of vibrating screen.

 

4. Staubkollektor vu méngem Brechsystem

The dust collector of mine crushing system is mainly composed of upper and lower boxes, ash hopper, ash discharging device, filtering device, injection device, induced draft fan and other main components. It has the advantages of large dust treatment, good purification effect, reliable operation, saving installation space and simple daily maintenance. It is used together with hammer crusher, jaw crusher and impact crusher.

The dust collector of mine crushing system is used in the crushing system of the mine to solve the problem of excessive dust and serious pollution in the process of crushing, separation and transportation of ore by machine. The dust collector of the crusher is installed with dust collection device at the dust point, and the dust is sucked into the dust collector box of the crusher through negative pressure for purification treatment, so as to separate the dust from the clean air.

The dust collector of mine crushing system uses centrifugal fan to produce negative pressure area at the dust sealing cover, and inhales the dust into the dust removal equipment. The pulse bag filter is equipped with dust removal cloth bag. When the dust gas passes through the filter bag, the dust is blocked and separated, and the purified gas is discharged through the fan. The dust on the surface of the filter bag is injected by the electromagnetic pulse valve to make it fall off the filter bag. The compressed air injection is automatically controlled by PLC without human control, which is one of its major characteristics. Pulse bag filter is not only used in crushing, but also used in dust control of various industries. It has achieved good dust removal effect and reached the design requirements. It is an ideal dust removal equipment at present.

D'Haaptcharakteristike vum Staubkollektor vum Groufzuchsystem si wéi folgend
1. The advantages of the counter blowing and pulse blowing dust collectors in the collecting and separating chamber are that the unit volume treatment air volume is large, the system resistance is small, and the dust removal efficiency is high;
2. It can directly deal with other dust with dust concentration up to 200g / Nm3, and the other emission concentration after treatment is lower than 50mg / Nm3. It can also meet the stricter emission requirements according to the special needs of users;
3. It is used for dust removal in pulverized coal system. According to the properties of pulverized coal, dust bag and explosion-proof measures are adopted.

 

5.Méng Staubkollektor


The mine dust collector is used to deal with the crushing of the mine. The working environment and atmospheric environment are seriously polluted due to the dust emission in the process of piercing, drilling, blasting, shipping, crushing and so on. In dry rock drilling without dust control measures, the dust concentration of working face can reach hundreds or thousands of milligrams per meter. When there is no dust prevention measures in underground crushing chamber, the dust concentration can reach several thousand milligrams per meter. The mine dust collector should be suitable for the characteristics of the mine. It is required to be simple in structure, small and compact in size, easy to move, moisture-proof and durable. When the comprehensive dust control measures adopted in each working procedure still fail to meet the requirements, it is necessary to take personal protection.

Mine dust collector is a kind of round shell dust collector with large air volume, good dust removal effect, high dust removal efficiency, reliable operation, convenient maintenance and small floor area.
1. The dust remover is composed of upper box, middle box, ash hopper, support, filter bag component, back blowing ash cleaning mechanism, ash unloading valve, etc.
2. Dust collection and filtration system: mainly composed of filter bag, bag cage, flower board components, ash hopper and tangential air inlet system.
3. Ash Botzen an Entluede System: Héichdrock Fan, Rotary Reverse Blow Pipe, Reduktiounsmotor.
4. Elektresch Kontrollsystem: automatescht Kontrollsystem.

The mine dust collector adopts the sinking air inlet mode to avoid the secondary dust pollution, and adopts the gravity separation principle to improve the filtering effect. The cartridge filter material dust collector has large filtering area and small air cloth ratio, which greatly saves the design area. The dust collector has the standardized and modular design. The equipment is easy to expand and easy to install on site. The cartridge filter dust collector is designed with high-pressure air pulse back washing. The filter material cleaning effect is good and the service life of the filter material is prolonged. The cartridge filter dust collector has small operation pressure loss resistance and can reduce the power of the exhaust fan. Furthermore, it can reduce the operation cost, shorten the exchange time of cartridge filter material, and do not need any manual tools with format material filter material. It can collect various kinds of pollution dust with fine particle size, cohesiveness, fiber, chemistry, electrification and high temperature. The dust collector can clean and discharge dust automatically.

Dust prevention of mine crushing: on the basis of airtight equipment, the combined measures of wet dust prevention and mechanical dust removal can be adopted for the dust generated by various crushing equipment. The purification equipment of mechanical dust removal adopts bag type dust collector or wet type dust collector. Wet dust collector should be selected for dust removal of underground crushing chamber. When the exhaust air of dust removal system can not be discharged to return air roadway or ground, but can only be discharged locally, the exhaust air shall be treated by filter.

Mine perforation dust prevention: a large amount of dust is produced during the operation of the open-pit drilling rig. Measures such as air-water mixed wet rock drilling inside the hole, dry dust catching outside the hole and wet dust catching can be adopted. Because of the high initial dust concentration, two-stage purification of cyclone and bag filter is needed.

Mine dust remover is suitable for all kinds of dust gas, with high-quality filter materials, such as dust, acid, alkali, etc. The air inlet with round shell and spiral line can bear high pressure. The dust removal efficiency of the mine dust collector is as high as, and the accessories such as the electromagnetic valve with a long service life of 3 million times are adopted to perfect the self purification and dust cleaning system. Generally, it can be used at room temperature below 120 ℃, and it can also provide high-temperature equipment below 250 ℃. The equipment can be made of carbon steel or stainless steel. Our company can provide special design and one-stop turnkey engineering for special needs of users.

 

 



Kontakt Form